My Project

Having a project car is no easy task.  Especially considering the lack of funds and storage space available to me as of now.  So I finally find myself out of school, in search of a "new" car.  This is where my 'needs' and 'wants' collide once again.  I need something that can be driven daily, be somewhat practical, and survive a Canadian winter.  Sadly that immediately eliminates a lot of the things that can remotely be considered an "enthusiast's" vehicle. 

Earlier this summer I stumbled across a first generation GMC Jimmy 2 Door on Kijiji for sale in Scarborough.  I couldn't remember the last time I had ever seen one of these on the road or in a junkyard - which could mean one of two things;  either they've all disintegrated and returned to mother earth, or they have been hoarded and turned into hot rods and mini trucks.  While this may not seem like the typical enthusiast's vehicle, I am convinced that it still provides a somewhat raw, if not fun driving experience despite sporting an automatic transmission. 

But most importantly, it spoke to me.  Something that I've never imagined owning or even observed as anything interesting was somehow just right.  Perfectly analog.  Perfectly honest.  No frills in a good way.  So here it is, my 1989 GMC S-15 Jimmy 4x4.  It is a badge engineered Chevrolet S-10 blazer of the pre-facelift variety.



Now on to the technical stuff.  The engine is a "fuel injected" 4.3 liter V6, initially rated at *holds breath* 160 whopping horsepower and 235 ft-lbs of torque.  As miserable as that sounds, this was actually marketed as a vehicle with "class leading power" in 1989.  I'm not kidding, check the brochure.  This was the tail end of a smog crippled era where large hulking American engines were choked out by government regulated emissions standards following an oil crisis.  So I guess you would've considered yourself lucky to get 160 ponies in a compact SUV back then.  Anyways, the 4.3 Chevy V6 used here is a derivative of the steady but antiquated 350 cubic inch V8.  It shares the same 4.00" bore and 3.48" stroke but is simply shortened by 2 cylinders, which shows remarkable GM forethought and engineering!  The V6 was advertised as the "Vortec" engine, with reference to "Swirl-port" cylinder heads that allegedly improved airflow by channeling the intake gasses into a spiral.  But I must add that most people who are into these trucks will not consider the early 4.3 to be a Vortec motor because it lacks the "Vortec" heads that had much improved flow and compression ratio only available in trucks/vans produced onward of 1994.  This motor utilizes Throttle Body Fuel Injection or "TBI" according to General Motors.  It's basically a two-barrel throttle body setup with two fuel injectors that pressurize gas and spray it down into the intake manifold.  While this technology has been phased out decades ago, it is an interesting piece of automotive history that is actually pretty easy to service if things get hairy.



The truck is a 4x4 model using old school vacuum-activated front axles.  It was advertised to have "Insta-Trac 4-Wheel Drive" which allows the driver to shift in and out of 4-Hi while the vehicle is still moving.  This was a big deal in 80s in contrast to traditional manual locking hubs.  The transmission is a GM 700R4, which is a 4-speed overdrive unit and quite the slush-box.  It is the predecessor to the modern 4L60E found in GM truck and full size models.  It also has an interesting array of options including a locking rear differential (code G80) which I can confirm makes for fun, if not slow donuts.  It has a "Gypsy" appearance package which includes blacked out mirrors, painted metal bumpers, 2 tone body paint, blacked out grille, wind deflector and coloured seats in the interior.  It also has really cruddy power windows and locks.



When I bought the truck, I became the 4th owner (which has a grim but interesting story I will save for another time) at 112,000 kilometers on the odometer.  Which was a major selling point for me, although I quickly realized that the age old saying "low miles does not mean low cost" had hit me square in the face.  The truck rough.  A Ontario kind of rough, with a good a mount of Bondo hiding rust patches in the quarter panels.  But hey, as far as I'm concerned, $2,300 could've been spent in worse places.

I still don't know which direction I intend to go with this truck.  I had many thoughts on lowering it an getting lower profile tires for a stout looking street machine look, but I would be rendering it's 4x4 capabilities useless.  Also the 4x4 models use torsion bar suspension instead of coils in the front so they naturally sit higher than the 2 wheel-drive trucks.  So right now I think I'll stick to cleaning it up and trying to keep this gem running as long as possible.

Comments